This tool comes with 3 sets of dies, flat, fullering and unground blanks for shaping as you see fit. The mill scale has been removed from the blanks and initial grinding has been performed. They are 2" wide x 1/2" thick.
The dies and frame are made from A36.26% carbon structural hot rolled steel, which allows for a lighter, but very strong tool. I can make dies to order from A36 steel, or a higher carbon or alloy steel if desired at an additional cost. The opening can accommodate stock up to 3 tall. The mounting brackets have not been drilled, so it can be custom mounted for your application.
It can be mounted on to a 3" x 5" steel plate that can be as thin as 1/8 thick, or bolted to a bench, held in a vise, or on your anvil. Does not include steel stock shown holding the dies open. I chose to use 3/8" bolts for the construction of this tool because the vertical spacers can move side to side to accommodate dies that are a little less thin, or dies a little more than 2" wide. Bolts also allow you to easily modify the tool as you see fit.Welding or riveting locks you into to just one size. 3/4 thick vertical spacer bars can also be attached to the tool for thicker dies. My goal is to make affordable tools, especially blacksmith tools, for anyone from hobbyist to full time smith. If you have any questions, or need a tool made for a specific purpose, please contact me.
The item "Blacksmith Guillotine Tool with 3 Sets of Dies, Flat, Fullering & Blank Free Ship" is in sale since Monday, April 22, 2019. This item is in the category "Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing". The seller is "wyoblacksmithtools" and is located in Douglas, Wyoming.This item can be shipped worldwide.